OMEGA EP Power Conditioning
-
Power Conditioning Cables
Power Conditioning Cables
Power conditioning cables being installed in beamline 4.
-
Beamline Four
Beamline Four
Beamline 4 with power conditioning activity.
-
Cable Installtion
Cable Installtion
Installling th e cables for the power conditioning units.
-
Power Conditioning Group
Power Conditioning Group
The power conditioning group in the power conditioning room.
-
Power Conditioning Cables
Power Conditioning Cables
Cables for the power conditioning units.
-
Power Conditioning Room
Power Conditioning Room
Power conditioning units in the power conditioning room.
-
Power Conditioning Room
Power Conditioning Room
Power conditioning unit in the power conditioning room.
-
Amplifier Module
Amplifier Module
Schematic plan view of a 40-cm disk amplifier module containing a laser disk with the 19-mm-bore flash lamps. The path of the laser beam is also shown. All the flash lamps on each side of each laser disk are housed within a single pump module. A blast window in front of the flash lamps protects the laser glass in case of lamp failure.
-
Power Conditioning Units
Power Conditioning Units
Power conditioning units are designed as mirror image pairs of each other to facilitate back-to-back placement in the Capacitor Bays. This design enhances serviceability. HV-discharge cables to the flash lamps in the amplifiers exit the top of each module (not shown).
-
Labeled Power Conditioning Unit
Labeled Power Conditioning Unit
A quad-fold front door affords unrestricted access to repair the power conditioning unit.